EN 
DE
XMC7000: Mikrocontroller-Architektur für Industrieapplikationen
Introduction to the XMC7000 Microcontroller Architecture CPU and CPU Subsystem (CPUSS) On-Chip Flash Address Map Protection Fault-System Crypto Module Inter-Processor Communication (IPC) Ports (GPIO) Interrupt and Exceptions DMA Event Generator (EVTGEN) Trigger Multiplexer (TRIG-MUX) Real-Time Clock Module (RTC) Watchdog Timer (WDT) Timer Counter Pulsewidth Modulator Module (TCPWM) Reset Clock Power ROM Flash Boot CAN-FD Serial Communication Block (SCB) LIN-UART Inter-IC Sound Bus (I2S) Giga Ethernet Serial Memory Interface (SMIF) Analog Digital Converter (ADC) Digital Analog Converter (DAC) Debug Support Um den Inhalt der Schulung zu vertiefen, werden Übungen zu Interrupts, Timer, serieller Schnittstelle und ADC durchgeführt
- Die Übungen basieren auf dem KIT_XMC71_EVK_LITE_V1 unter Verwendung von ModusToolbox (Visual Studio Code)
Sie kennen die Architektur, die wesentliche On-chip-Peripherie und die Besonderheiten (insbesondere der Multicore-Architektur und Safety-Erweiterungen) der Bausteinfamilie XMC7000.
Sie können Low-Level-Treiber für diese Hardware einsetzen, Beispiele für Ihre Zwecke adaptieren und mit einem Debugger testen.
Die zahlreichen Übungen verleihen der Schulung einen Software-Workshop-Charakter.
Ihre Vorteile:
Hardware- und Software-Architekten, Hardware- und Software-Entwickler, Testingenieure
ANSI-C Kenntnisse; Erfahrung mit Programmierung und Aufbau eines Mikroprozessor-/Mikrocontrollersystems.
Empty do not delete
Onsite training: Individual workshops – tailored precisely to your project
We will be happy to answer your questions.
Coaching with added value - expert knowledge for your project success
Our coaching offers have the great advantage that our experts contribute their knowledge and experience directly to your solution process and thus directly contribute to your project success.
| Date | Location | Language | Price | Duration | |
|---|---|---|---|---|---|
*Price per participant, in euros plus VAT.
Registration code: XMC7000
Empty do not delete
All-inclusive!
The training price includes:
Lunch, drinks, training materials and your participation certificate
Seminar location
In-person training:
MicroConsult Academy GmbH
Charles-de-Gaulle-Str. 6
81737 Munich, Germany
+49 89 450617-71
>> Directions and hotel information
Live online trainings:
Take place online via WebEx or Zoom.
Organizational details
Reservation / booking
You can make a non-binding training seat reservation at any time; we will keep the reservation for you for up to max. three weeks before the training starts.
To confirm your participation in a training, please submit a binding booking.
You can make the non-binding reservation as well as the binding booking online on the respective training page (button "Booking" or "Non-binding reservation").
Please also note our Bonus program when booking several training sessions at the same time
and/or participants.
Seminar location
MicroConsult Academy GmbH
Charles-de-Gaulle-Str. 6
81737 Munich, Germany
Phone: +49 89 450617-71 >> Directions
Training times (face-to-face training)
Please note:
For some training sessions, the times may vary. Therefore, please always check the start and end times in your registration confirmation. which we will send you before your training!
One-day training: 08:30 – 17:00 h
Two-day training: Day 1: 9:30 – 17:30 h / Day 2: 8:30 – 17:00 h
Three-day Training: Day 1: 9:30 – 17:30 h / Day 2-3: 8:30 – 17:00 h
Four-day training: Day 1: 9:30 – 17:30 h / Day 2-4: 8:30 – 17:00 h
4.5-day training: Day 1: 9:30 – 17:30 h / Day 2-4: 8:30 – 17:00 h / Last day: 8:30 – 13:00 h
Five-day training: Day 1: 9:30 – 17:30 h / Day 2-4: 8:30 – 17:00 h / Last day: 8:30 – 15:00 h
The structure of our live-online trainings is different to face-to-face trainings. Please refer to our registration confirmation for training times.
Training certificate
After the training, you will receive your MicroConsult Training Certificate to document the know-how you acquired.
Training documentation
High-quality, extensive training documentation is included in the training price.
Material
All you have to bring is thirst for knowledge and curiosity. Our seminar rooms are fully equipped with everything needed to run the training - including your training documentation and stationery.
Catering
Hospitality is important to us. That's why we invite you to lunch at a nearby restaurant. Refreshments are also provided: hot and cold drinks are available throughout the day.
Training environment
Our training rooms offer an open and friendly atmosphere and feature high-quality and modern training equipment.
Location
The MicroConsult training center is conveniently located and can be reached easily be public transport or by car. Several hotels are in close vicinity.
Click here for directions and hotel information.
Do you need assistance?
We are happy to help. Our Service Office will answer any questions you may have about organizing open/online training courses by calling +49 (0)89 450617-71 or sending an email to training@microconsult.com.
Bonus program
The group advantage: Binding registration of a group for a training
Number of persons |
Amount of the discount |
| 2 to 3 people | 5 % |
| 4 to 5 people | 10 % |
| from 6 people | 15 % also when split into 2 dates |
| more than 8 people | upon request |
The training bonus: Binding registration of a person for several training courses
Number of training sessions |
Amount of the discount |
|---|---|
| 2 training sessions | 5 % |
| 3 training sessions | 8 % |
| More than 3 training sessions | upon request |
What else is important
This bonus scheme applies exclusively to our open training courses.
To take advantage of the special conditions, a closed, binding registration and the participation of all booked persons on the agreed dates are required. The basis for the calculation is the current price list on www.microconsult.de.
The individual discount models cannot be combined with one another. A date change by us or the participation of a substitute participant will not affect the terms and conditions.
Valid only for direct bookings through us; our bonus program does not apply to bookings through external training portals.
Please contact us, our Service Office is available at +49 (0)89 450617-71. Or you can also use the Contact form.
Together we will find the optimal solution for you!
Related trainings
TRAVEO™ T2G: Microcontroller architecture for automotive applications
Registration code: TRAVEO2
XMC4000 / XMC1000 Workshop: 32-Bit Industrial Microcontroller Arm® Cortex®-M4/ Arm® Cortex®-M0 – Classroom Training
Registration code: XMC4000
Cortex®-M7, M4, M3, M0+, M0: Arm® Cortex-M architecture training – classroom training
Registration code: CORMX
Cortex®-R4, R5, R7, R8: Arm® Cortex-R architecture training – classroom training
Registration code: CORRX
Cortex®-A5, A7, A8, A9, A15, A17: Arm® Cortex-A architecture training – classroom training
Registration code: CORAX
Armv8-R Workshop: 32-bit Cortex® microcontroller core for real-time applications in automotive, industrial and embedded systems – classroom training
Registration code: ARMV8R
Cortex®-M23, M33: Armv8-M Architecture Training with Security Extension – In-person Training
Registration code: ARMV8MS
Cortex®-M23, M33: Armv8-M Architecture Training for participants with knowledge of the previous version – In-person training
Registration code: ARMV8MU
Cortex® Architecture: Performance Optimization – In-Person Training
Registration code: COROP
STM32: Technical Training – In-person Training
Registration code: STM32
Arm7/ Arm9/ Arm10/ Arm11™: Architecture and Embedded Programming – In-Person Training
Registration code: ARM-7/9
Embedded C Training: Programming methods and tools for embedded applications – classroom training
Registration code: EMB-C
Embedded C++: Object-oriented programming for microcontrollers with C++/EC++ and UML – In-person training
Registration code: EC++
Software architecture training for embedded and real-time systems – classroom training
Registration code: EMB-AR
RTOS Fundamentals and Application: Mechanisms and their use in runtime architectures for embedded and real-time systems – classroom training
Registration code: RTOS-AR
µVision®: Handling µVision and simulation with the Cortex®-M3 architecture – classroom training
Registration code: µVISION
Coaching: Arm®/CORTEX®
Registration code: C-ARM-COR
Do need additional information? Feel free to get in touch!
Melanie Menzl
Organization open trainingsSilke Bluhm
Organization of on-site trainingNora Pohle
Saleskontakt@microconsult.com
+49 89 450617 - 71
Your benefits at a glance:
- 100 % practical: You will learn what really matters in everyday project work – with real tools and proven methods from experts from the real project world.
- How and where you want: Choose between live online or face-to-face training, conducted in our training center or at your location.
- Small groups, big impact: Maximum 12 participants – so there is room for your questions, your topics, your practice.
- Understandable instead of intellectual: Complex content becomes tangible – with examples, interactive exercises and a clear thread.
- Combinable: Ideal as an individual seminar or part of a training series.
- Sustainable learning success: You will receive high-quality documents for further work.
- Flexible participation: Cancel or rebook free of charge up to 3 weeks before the appointment – your booking remains transferable.